claude-code-gnome-extension

13 Commits 1 Branch 0 Tags

3 Commits

Include renames

Author	SHA1	Message	Date
av	2565d45bb5	Act on four reviews: state machine, resource bounds, teardown Four agents reviewed this in parallel -- correctness, GNOME integration, edge cases, security. Everything below was reproduced before being fixed; several findings that survived the first reading did not survive a probe and are not here. State machine, the two that mattered most. A pending permission prompt was erased by any subagent bookkeeping event: SubagentStop or the next PreToolUse recomputed the state from scratch, so a session sat at "working" with a dialog open and nothing ever raised it again. Blocked now outlives everything except evidence the question was answered. Separately, the stale-event guard refused whole events, including the subagent counter's increments and decrements -- but those are deltas and deltas commute, so a "+1" that lost a timestamp race left the count short and the batch freed the session while a subagent was still running. The guard now gates the state decision only. Corrupt or hostile state files could wedge the panel or take the hook down for every session: a non-numeric pid raised inside sweep_dead before the hook wrote its own file, so one bad byte stopped new sessions appearing at all. Numbers read back from disk are coerced, one unreadable file no longer aborts the sweep, and a stored timestamp far in the future -- corruption, or a clock stepped backwards by NTP -- no longer refuses every later event forever. Resource bounds, all in the compositor process. A state file was read whole with no size check: a symlink to /dev/zero took a test process past 4 GB in three seconds, which in gnome-shell ends the session. Sizes are checked before the read, sessions and zellij subprocesses are capped, labels ellipsize, and cwd and messages are truncated at the hook. Teardown hung off an overridden destroy(), which only runs when JS calls it. An actor destroyed any other way -- another extension rebuilding the panel boxes -- left the timer and the file monitor running against a disposed actor. It is a destroy signal now. The zellij child is killed rather than merely abandoned. The glyph was pinned to physical pixels and rendered half-size on HiDPI; size comes from the stylesheet, and the foreground colour is normalised by inspection rather than assuming which colour struct the shell hands back. Chip labels: non-Latin names all collapsed to "?", because the split treated every Cyrillic letter as a separator -- notable for a tool whose own README is Russian. Seniority also ranked by time-in-state rather than session age, so after a shell restart the older session could take the digit; the hook now records when the session began. zellij: a dump ends with new_tab_template and swap_tiled_layout blocks whose tab lines carry no name, and their panes were being attached to the last real tab -- which then answered for every unmatched directory, confidently and wrongly. install.py no longer widens the mode of a settings.json someone narrowed to 0600, no longer overwrites the pristine .bak on a second run, no longer replaces a symlink out of a dotfiles repository with a regular file, and quotes the hook path. The debug log is capped and README now says plainly that it records prompts verbatim. Not fixed, deliberately: the panel does push the clock about 70 px left with three labelled chips, which is inherent to putting them in the centre box; two different projects abbreviating alike still read as one project with a digit; GNOME 48 remains unverified for the colour struct and for St.BoxLayout's vertical property, both flagged rather than guessed at.	2026-08-09 20:20:45 +03:00
av	ca42d69704	Cap the chips at three, and make the menu report-only Two changes that pull in the same direction: the panel says less, and the menu stops pretending to do anything. The chip row had no bound. It sits in the centre box next to the clock, so enough open sessions would have shoved the clock off centre. It now shows the first N, settable and three by default, and counts the rest as "+N". Chips are already ordered by urgency, so the ones that survive the cut are the ones that need you soonest. Labels are still assigned across every session, including hidden ones, so a chip does not change when the cap does or when a session ahead of it disappears. Clicking a menu row used to switch the zellij tab and raise a terminal. That is gone. It cost real machinery for what it saved -- gnome-terminal runs every window under one shared server process, so windows cannot be matched by pid and the code fell back to matching the zellij session name against window titles, with all the ways that misses. The menu reports status; alt-tab is not the bottleneck. Rows are built inert rather than demoted after the fact, because PopupBaseMenuItem latches _activatable in its constructor. zellij tab lookup stays: naming the tab is the better half of that feature and costs one process every couple of minutes. The preferences test now asserts a control per settings key rather than a switch per key, so the new spin row counts and a future non-boolean setting cannot slip in without one.	2026-08-09 19:37:38 +03:00
av	7fc7f63842	Show Claude Code session status in the GNOME panel Answers one question at a glance: is any session waiting for me, and which one. With several sessions open the cost is not knowing what each is doing, it is noticing that one stopped an hour ago. Claude Code hooks write one JSON file per session under ~/.local/state/claude-code-status; the extension watches the directory with Gio.FileMonitor, so nothing polls and there is no daemon. Two distinctions carry the design: * blocked (permission prompt) is kept apart from waiting (turn done). Merged, a finished task looks as urgent as a stuck one, which is exactly the judgement the indicator exists to make. * the panel names the oldest session in the top state, not the latest. The session you forget is the one that has been waiting longest. PostToolUse is registered although it looks redundant: it is the only event that fires after a permission is granted, so without it a session stays blocked in the panel for the rest of the turn. It writes only on an actual state change, so the usual case costs no I/O. Stop and SessionEnd are synchronous, unlike the rest. Both fire as the process is about to go quiet, and an async hook racing that exit gets killed before it writes -- claude -p left a session pinned at busy. Concurrent hooks for one session serialise on an flock plus a timestamp guard; tests/test-hook.sh covers each separately, because the burst test passes on the timestamp guard alone. Sessions running in zellij are located by tab name rather than by path, matched through dump-layout on the working directory. The dump carries no pane ids, so ZELLIJ_PANE_ID cannot be used; rows that do not resolve stay inert instead of pretending a click does something. lib/sessions.js deliberately imports nothing from the shell resource namespace, which lets the riskiest logic -- liveness, ordering, partial reads, monitoring -- run under plain gjs in tests/test-sessions.js.	2026-08-09 18:11:27 +03:00

Author

SHA1

Message

Date

av

2565d45bb5

Act on four reviews: state machine, resource bounds, teardown

Four agents reviewed this in parallel -- correctness, GNOME integration,
edge cases, security. Everything below was reproduced before being fixed;
several findings that survived the first reading did not survive a probe
and are not here.

State machine, the two that mattered most. A pending permission prompt was
erased by any subagent bookkeeping event: SubagentStop or the next
PreToolUse recomputed the state from scratch, so a session sat at "working"
with a dialog open and nothing ever raised it again. Blocked now outlives
everything except evidence the question was answered. Separately, the
stale-event guard refused whole events, including the subagent counter's
increments and decrements -- but those are deltas and deltas commute, so a
"+1" that lost a timestamp race left the count short and the batch freed
the session while a subagent was still running. The guard now gates the
state decision only.

Corrupt or hostile state files could wedge the panel or take the hook down
for every session: a non-numeric pid raised inside sweep_dead before the
hook wrote its own file, so one bad byte stopped new sessions appearing at
all. Numbers read back from disk are coerced, one unreadable file no longer
aborts the sweep, and a stored timestamp far in the future -- corruption, or
a clock stepped backwards by NTP -- no longer refuses every later event
forever.

Resource bounds, all in the compositor process. A state file was read whole
with no size check: a symlink to /dev/zero took a test process past 4 GB in
three seconds, which in gnome-shell ends the session. Sizes are checked
before the read, sessions and zellij subprocesses are capped, labels
ellipsize, and cwd and messages are truncated at the hook.

Teardown hung off an overridden destroy(), which only runs when JS calls
it. An actor destroyed any other way -- another extension rebuilding the
panel boxes -- left the timer and the file monitor running against a
disposed actor. It is a destroy signal now. The zellij child is killed
rather than merely abandoned.

The glyph was pinned to physical pixels and rendered half-size on HiDPI;
size comes from the stylesheet, and the foreground colour is normalised by
inspection rather than assuming which colour struct the shell hands back.

Chip labels: non-Latin names all collapsed to "?", because the split
treated every Cyrillic letter as a separator -- notable for a tool whose
own README is Russian. Seniority also ranked by time-in-state rather than
session age, so after a shell restart the older session could take the
digit; the hook now records when the session began.

zellij: a dump ends with new_tab_template and swap_tiled_layout blocks
whose tab lines carry no name, and their panes were being attached to the
last real tab -- which then answered for every unmatched directory,
confidently and wrongly.

install.py no longer widens the mode of a settings.json someone narrowed to
0600, no longer overwrites the pristine .bak on a second run, no longer
replaces a symlink out of a dotfiles repository with a regular file, and
quotes the hook path. The debug log is capped and README now says plainly
that it records prompts verbatim.

Not fixed, deliberately: the panel does push the clock about 70 px left
with three labelled chips, which is inherent to putting them in the centre
box; two different projects abbreviating alike still read as one project
with a digit; GNOME 48 remains unverified for the colour struct and for
St.BoxLayout's vertical property, both flagged rather than guessed at.

2026-08-09 20:20:45 +03:00

av

ca42d69704

Cap the chips at three, and make the menu report-only

Two changes that pull in the same direction: the panel says less, and the
menu stops pretending to do anything.

The chip row had no bound. It sits in the centre box next to the clock, so
enough open sessions would have shoved the clock off centre. It now shows
the first N, settable and three by default, and counts the rest as "+N".
Chips are already ordered by urgency, so the ones that survive the cut are
the ones that need you soonest. Labels are still assigned across every
session, including hidden ones, so a chip does not change when the cap
does or when a session ahead of it disappears.

Clicking a menu row used to switch the zellij tab and raise a terminal.
That is gone. It cost real machinery for what it saved -- gnome-terminal
runs every window under one shared server process, so windows cannot be
matched by pid and the code fell back to matching the zellij session name
against window titles, with all the ways that misses. The menu reports
status; alt-tab is not the bottleneck. Rows are built inert rather than
demoted after the fact, because PopupBaseMenuItem latches _activatable in
its constructor.

zellij tab lookup stays: naming the tab is the better half of that feature
and costs one process every couple of minutes.

The preferences test now asserts a control per settings key rather than a
switch per key, so the new spin row counts and a future non-boolean
setting cannot slip in without one.

2026-08-09 19:37:38 +03:00

av

7fc7f63842

Show Claude Code session status in the GNOME panel

Answers one question at a glance: is any session waiting for me, and
which one. With several sessions open the cost is not knowing what each
is doing, it is noticing that one stopped an hour ago.

Claude Code hooks write one JSON file per session under
~/.local/state/claude-code-status; the extension watches the directory
with Gio.FileMonitor, so nothing polls and there is no daemon.

Two distinctions carry the design:

  * blocked (permission prompt) is kept apart from waiting (turn done).
    Merged, a finished task looks as urgent as a stuck one, which is
    exactly the judgement the indicator exists to make.

  * the panel names the oldest session in the top state, not the latest.
    The session you forget is the one that has been waiting longest.

PostToolUse is registered although it looks redundant: it is the only
event that fires after a permission is granted, so without it a session
stays blocked in the panel for the rest of the turn. It writes only on
an actual state change, so the usual case costs no I/O.

Stop and SessionEnd are synchronous, unlike the rest. Both fire as the
process is about to go quiet, and an async hook racing that exit gets
killed before it writes -- claude -p left a session pinned at busy.
Concurrent hooks for one session serialise on an flock plus a timestamp
guard; tests/test-hook.sh covers each separately, because the burst test
passes on the timestamp guard alone.

Sessions running in zellij are located by tab name rather than by path,
matched through dump-layout on the working directory. The dump carries
no pane ids, so ZELLIJ_PANE_ID cannot be used; rows that do not resolve
stay inert instead of pretending a click does something.

lib/sessions.js deliberately imports nothing from the shell resource
namespace, which lets the riskiest logic -- liveness, ordering, partial
reads, monitoring -- run under plain gjs in tests/test-sessions.js.

2026-08-09 18:11:27 +03:00