Files
claude-code-gnome-extension/hooks/claude-status-hook.py
T
av 626c2b6d2c Merge "idle" into "waiting"
"Idle" was set by SessionStart and by nothing else, and there was no path
back into it. So it never meant "sitting unused" -- it meant "opened and
never asked anything yet", a state a few seconds long that you would
almost never catch. Meanwhile a session that finished an hour ago and was
forgotten showed as waiting, which is correct but leaves the fourth state
with nothing to describe.

A session that has just opened is waiting for your first prompt exactly
as one that finished a turn is waiting for your next. They are the same
thing, and now they are the same state. Three glyphs instead of four,
which also gives the remaining three more room to be told apart in a
monochrome panel.

Files written by the previous hook still say "idle", and a session open
across the upgrade must not disappear, so unrecognised states now read as
waiting rather than being treated as unknown. Covered by a test that
feeds an "idle" file to the store and asserts it comes back as waiting,
sorted by age among the others.

The "hide when nothing is running" setting goes with it. Its condition
was "no sessions, or all of them idle"; with idle gone the second half is
unreachable and the first was already unconditional, so the switch could
no longer change anything. A control that does nothing is worse than no
control.

The compaction test also got stronger in passing: it now checks that a
mid-turn SessionStart leaves a *busy* session alone, which is the case
that matters. It used to assert from waiting, where the state it was
guarding against happened to be the state already stored.
2026-08-09 19:14:34 +03:00

302 lines
11 KiB
Python
Executable File

#!/usr/bin/env python3
"""Claude Code hook -> per-session state file for the GNOME panel indicator.
Reads one hook event as JSON on stdin and maps it to a session state, written
to $XDG_STATE_HOME/claude-code-status/<session_id>.json. The GNOME extension
watches that directory; no polling, no daemon, no socket.
Design notes that are easy to get wrong:
* Writes are skipped when the state does not change. PostToolUse fires on every
tool call, and its only job here is to clear "blocked" once a permission has
been granted -- letting it rewrite the file each time would make the directory
monitor fire hundreds of times per turn for no new information.
* Hooks are registered async, so two events can race (the last PostToolUse of a
turn against that turn's Stop). The whole read-decide-write runs under a file
lock and an event older than the stored one is refused; without both, a late
"busy" buries "waiting" and the panel claims a session is working while it
actually waits for input.
* No stdlib import beyond what is needed: this runs once per tool call.
"""
import fcntl
import json
import os
import sys
import time
STATE_DIR = os.path.join(
os.environ.get("XDG_STATE_HOME") or os.path.expanduser("~/.local/state"),
"claude-code-status",
)
# Notification covers several unrelated things; only some mean "the session
# stopped and is asking me something". auth_success / elicitation_complete /
# elicitation_response are progress chatter and must not touch the state.
# Observed: a question put to the user (AskUserQuestion) arrives as
# "permission_prompt" too, with the same generic message as a tool asking to
# run. The two are therefore not separable here, which is why the panel has one
# "blocked" state rather than telling a permission from a question.
NOTIFICATION_STATES = {
"permission_prompt": "blocked",
"agent_needs_input": "blocked",
"elicitation_dialog": "blocked",
"idle_prompt": "waiting",
"agent_completed": "waiting",
}
EVENT_STATES = {
# A session that has just opened is waiting for your first prompt, which is
# the same thing as one that has finished a turn: the input line is free
# and the next move is yours. It had a state of its own once; it was only
# ever reachable before the first prompt, so it bought a fourth glyph in
# the panel that nobody saw.
"SessionStart": "waiting",
"UserPromptSubmit": "busy",
"PreCompact": "busy",
"PostToolUse": "busy",
"Stop": "waiting",
}
def debug_log(event):
"""Append raw events when a 'debug' marker file exists in the state dir.
Gated on a file rather than an env var because the hook inherits claude's
environment, which cannot be changed without restarting the session.
"""
marker = os.path.join(STATE_DIR, "debug")
if not os.path.exists(marker):
return
try:
with open(marker, "a") as fh:
stamped = dict(event, _at=time.strftime("%H:%M:%S"))
fh.write(json.dumps(stamped, sort_keys=True)[:2000] + "\n")
except OSError:
pass
def derive_state(event):
"""Return the new state, 'end' to drop the session, or None to ignore."""
name = event.get("hook_event_name")
if name == "SessionEnd":
return "end"
if name == "Notification":
return NOTIFICATION_STATES.get(event.get("notification_type"))
# A subagent finishing its own turn is not the session becoming free; the
# main agent is still working. SubagentStop is a distinct event and is not
# registered, but Stop carries agent_id when raised inside an agent.
if name == "Stop" and event.get("agent_id"):
return None
return EVENT_STATES.get(name)
def read_environ(pid):
"""Environment of a process as a dict, empty if it is gone or not ours."""
try:
with open("/proc/%d/environ" % pid, "rb") as fh:
raw = fh.read()
except OSError:
return {}
env = {}
for entry in raw.split(b"\0"):
if not entry:
continue
key, sep, value = entry.partition(b"=")
if sep:
env[key.decode("utf-8", "replace")] = value.decode("utf-8", "replace")
return env
def read_cmdline(pid):
try:
with open("/proc/%d/cmdline" % pid, "rb") as fh:
return fh.read().replace(b"\0", b" ").decode("utf-8", "replace")
except OSError:
return ""
def parent_of(pid):
try:
with open("/proc/%d/status" % pid, "r") as fh:
for line in fh:
if line.startswith("PPid:"):
return int(line.split()[1])
except (OSError, ValueError):
pass
return 0
def find_claude_pid():
"""Nearest ancestor that is the claude process itself, or 0 if unknown.
The hook is spawned through a shell, so the immediate parent is usually not
claude. Walking beyond a handful of levels risks latching onto an outer
claude when one session drives another, so the search stops early.
Returning 0 rather than guessing matters: the reader deletes state files
whose pid is gone, and the obvious fallback -- the shell that spawned this
hook -- exits milliseconds later, which would make the session flicker in
and out of the panel forever.
"""
pid = os.getppid()
for _ in range(6):
if pid <= 1:
break
# Matched anywhere in the command line, not just argv[0]: installs that
# run it as `node .../claude/cli.js` are just as valid as a direct one.
if "claude" in read_cmdline(pid):
return pid
pid = parent_of(pid)
return 0
def alive(pid):
return pid > 0 and os.path.exists("/proc/%d" % pid)
def sweep_dead(keep):
"""Drop state files whose claude process is gone.
A killed terminal never sends SessionEnd, so files leak. Cleaning up on
SessionStart keeps the sweep off the hot path -- the extension only has to
hide stale entries, not own their lifetime.
"""
try:
names = os.listdir(STATE_DIR)
except OSError:
return
for name in names:
if not name.endswith(".json") or name == keep:
continue
path = os.path.join(STATE_DIR, name)
try:
with open(path, "r") as fh:
pid = json.load(fh).get("pid", 0)
except (OSError, ValueError, AttributeError):
continue
# pid 0 means the hook could not identify the process; there is nothing
# to test for liveness, so leave it to the reader's age cutoff.
if pid and not alive(pid):
for victim in (path, path + ".lock"):
try:
os.unlink(victim)
except OSError:
pass
def write_atomic(path, payload):
tmp = "%s.%d.tmp" % (path, os.getpid())
with open(tmp, "w") as fh:
json.dump(payload, fh)
os.replace(tmp, path)
def apply_event(event, state, path, now):
"""Read the current state, decide, and write. Must run under the lock."""
if event.get("hook_event_name") == "SessionStart":
# Swept before any early return: a resumed session keeps its id, so its
# SessionStart finds an unchanged state and would otherwise bail out
# before ever reaching the sweep.
sweep_dead(keep=os.path.basename(path))
if state == "end":
for victim in (path, path + ".lock"):
try:
os.unlink(victim)
except OSError:
pass
return
previous = None
try:
with open(path, "r") as fh:
previous = json.load(fh)
except (OSError, ValueError):
previous = None
if not isinstance(previous, dict):
previous = None
# Normalised here so the comparison below is against what would actually be
# stored: comparing a stored "" to a raw notification message rewrites the
# file on every idle_prompt for no change at all.
message = event.get("message", "") if state == "blocked" else ""
if previous:
# Auto-compaction raises SessionStart again, in the middle of a turn the
# session is still working on. Taking it at face value would flip a busy
# session to idle until the next tool call corrected it.
if event.get("hook_event_name") == "SessionStart" and event.get("source") == "compact":
return
# Refuse events that lost a race with a newer one.
if previous.get("event_ts", 0) > now:
return
# Nothing new to publish: stay quiet so the directory monitor stays quiet.
if previous.get("state") == state and previous.get("message", "") == message:
return
claude_pid = find_claude_pid()
env = read_environ(claude_pid) if claude_pid else {}
write_atomic(path, {
"session_id": event.get("session_id"),
"state": state,
"cwd": event.get("cwd") or "",
# Age is measured from the moment the state was entered, not from the
# last event, so "waiting 40 min" survives unrelated later writes.
"since": previous["since"] if previous and previous.get("state") == state else now,
"event_ts": now,
# 0 means "could not tell"; the reader must not take that for "dead".
"pid": claude_pid,
"event": event.get("hook_event_name", ""),
"notification_type": event.get("notification_type", ""),
"message": message,
"zellij_session": env.get("ZELLIJ_SESSION_NAME", ""),
"zellij_pane": env.get("ZELLIJ_PANE_ID", ""),
"transcript": event.get("transcript_path", ""),
})
def main():
now = time.time()
try:
event = json.load(sys.stdin)
except (ValueError, OSError):
return 0
if not isinstance(event, dict):
return 0
session_id = event.get("session_id")
if not session_id or "/" in session_id:
return 0
debug_log(event)
state = derive_state(event)
if state is None:
return 0
os.makedirs(STATE_DIR, exist_ok=True)
path = os.path.join(STATE_DIR, "%s.json" % session_id)
# Hooks for one session run concurrently -- the last PostToolUse of a turn
# races that turn's Stop. Comparing timestamps is not enough on its own:
# without a lock both processes read the same "previous" and the loser's
# write still lands last, pinning a finished session at "busy". The lock is
# a separate file because write_atomic replaces the inode of the real one.
with open(path + ".lock", "w") as lock:
fcntl.flock(lock, fcntl.LOCK_EX)
apply_event(event, state, path, now)
return 0
if __name__ == "__main__":
try:
sys.exit(main())
except Exception:
# A hook that fails loudly would spam every session with error output;
# a missing panel update is the cheaper failure.
sys.exit(0)